Click the category to show FAQs below or search for results

Gunsmithing & Modifications

Extended slide stops from companies like “Wilson” will work but need to be cut to clear the frame because they do not drop in.
We recommend using a qualified gunsmith to fit this.

 

TOP VIEW OF EXTENDED SLIDE STOP

ENLARGED VIEW OF
AREA TO REMOVE MATERIAL

Torque Specs for 2020 Staccato Pistols

Product Screw

Req. Torque

Thread Lock

Thread

Tool

2011 Double Stack Grip screws 25 – 30 Inch Pounds Blue Loctite 242 10-32 1/8 Allen
2011 Single Stack Grip Screws 25 – 30 Inch Pounds Red Loctite 271 10-32 1/8 Allen
2011 Double Stack Trigger Guard Screws 5 Inch Pounds Blue Loctite 242 4-40 1/16 Allen
2011 Single Stack Trigger Guard Screw 6 – 8 Inch Pounds 4-40 1/16 Allen
DUO iron sight plate screws 15 – 20 Inch Pounds 4×6 8.8 2.5 mm Allen
DUO RMR plate screws 15 – 20 Inch Pounds 4×6 8.8 2.5 mm Allen
RMR mounting screws 20 – 25 Inch Pounds 6-32 5/64 Allen
Delta Point Pro mounting screws 25 Inch Pounds Custom T 15
Carry DUO Plate Screw 10 – 15 Inch Pounds 3/32 Allen
Open frame mount 16 – 20 Inch Pounds 5-40 T 10
* PLEASE NOTE: the torque spcs for the optics and optic plates are not applicable to the HOST plate system.

No. Parts can be purchased on our website here: https://staccato2011.com/product-category/parts/

As of right now, no one manufactures an extended slide release for any of the Staccato 2020 series pistols.

Dawson Precision sells these extended mag releases for the 2011 double stacks but they do not fit the G2 grip:

https://dawsonprecision.com/mag-releases-sti-2011-by-dawson-precision/

Dawson Precision sells these extended magazine releases for the single stacks, but they do not fit the G2 grips:

https://dawsonprecision.com/mag-release-1911-drilled-tapped-with-button-by-ed-brown/

Dawson Precision sells two different oversize buttons for the extended magazine release:

https://dawsonprecision.com/mag-release-button-1911-2011-hicap-lo-pro-by-dawson-precision/

There is no after market extended magazine catch and there is not enough thickness in the button to drill and tap a thread for an extension or oversize button.